Product Description:

The DDS02.2-W200-BE95-02-FW is a drive controller produced by Bosch Rexroth Indramat and supplied within the DDS Drive Controllers series. It generates controlled power for synchronous or induction servo motors so motor torque and speed follow motion commands from a higher-level control system. Installed in multi-axis cabinets, the unit supports coordinated positioning, feed-rate regulation, and velocity profiling for machinery such as gantry loaders, presses, and packaging equipment.

Communication with external motion processors occurs over the SERCOS interface, a fiber-optic fieldbus that transmits real-time setpoints and returns status data with deterministic timing. The controller is rated for a continuous output of 200 A, allowing it to operate high-power servo motors without external current boosters. Thermal management relies on air cooling from inside the control cabinet, where the internal blower moves enclosure air across the heat sink so the drive can share a common HVAC system with adjacent electronics. Position and velocity control use digital servo feedback, and the hardware belongs to Line 02 within the DDS platform.

The unit can also interpret resolver feedback, allowing the same controller to operate legacy motors that use analog sine-cosine position signals. Hardware release Version 2 includes updated gate drivers and monitoring circuits that expand diagnostic coverage while remaining form-factor compatible with earlier releases. The control-loop and communication code is supplied as a separate firmware subitem, and this field-insertable module must match the machine requirements. With the required module installed, the hardware functions as a complete Digital AC Servo Drive Controller and supplies commutated three-phase power with closed-loop regulation in a single housing.