DDS02.2-W200-BE84-01-FW Bosch Rexroth Indramat
MPN: R911281439
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
30 Seconds
The Bosch Rexroth Indramat DDS02.2-W200-BE84-01-FW is a digital AC servo drive controller from the DDS Drive Controllers series. It supports a rated current of 200 Amps and uses air cooling from inside the control cabinet. The controller features a SERCOS communication interface and supports both digital servo and resolver feedback.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The DDS02.2-W200-BE84-01-FW is a drive controller manufactured by Bosch Rexroth Indramat within the DDS Drive Controllers series. The unit serves as the power and regulation stage between motion control electronics and rotary or linear servo actuators in automated machinery. By modulating output voltage in response to fieldbus commands, it maintains accurate torque and speed, supporting coordinated multi-axis moves in assembly, packaging, and process equipment. Its compact format and cabinet mounting simplify system layout where space and thermal control are critical. The design also suits centralized control cabinets that coordinate several servo axes from one motion system.
Electrical performance centers on a continuous output rating of 200 A, allowing the controller to drive large-frame servomotors without current derating during demanding duty cycles. Command data reach the drive over a SERCOS interface, giving deterministic 32-bit telegrams for position, velocity, and diagnostic exchange. Position feedback is returned through either digital servo feedback or resolver feedback, so both high-resolution encoders and rugged resolvers can be accommodated. Thermal management relies on internal air cooling, and all heat sinks shed waste heat into airflow drawn from inside the control cabinet. This eliminates external ducting but requires adequate panel ventilation so internal temperatures remain controlled during operation.
Identity parameters in the configuration EEPROM assign the unit to Function ID version 01. The controller is part of Line 02 and is built as Version 2. It is classified as a Digital AC Servo Drive Controller, which means it includes sinusoidal output stages and closed-loop current control. These identifiers limit the unit to supported option cards, communication settings, and feedback devices used on this platform. They also indicate which accessory combinations are intended for this controller and help keep electrical and sensor operation within the intended operating range.
Frequently Asked Questions about DDS02.2-W200-BE84-01-FW:
Q: Which communication interface does the DDS02.2-W200-BE84-01-FW controller use?
A: The DDS02.2-W200-BE84-01-FW utilizes a SERCOS interface for communication.
Q: How is the DDS02.2-W200-BE84-01-FW drive controller cooled?
A: Cooling is achieved using internal air circulation within the control cabinet.
Q: What types of motor feedback can the DDS02.2-W200-BE84-01-FW accept?
A: Digital servo feedback and resolver feedback are both supported for motor feedback on this drive controller.
Q: What is the rated current of the DDS02.2-W200-BE84-01-FW drive controller?
A: The rated current for the DDS02.2-W200-BE84-01-FW is 200A.
Q: Which line of the DDS Drive Controllers series does the DDS02.2-W200-BE84-01-FW belong to?
A: This model belongs to Line 02 within the DDS Drive Controllers series.