DDS02.2-W200-BE72-01-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911268315
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
17 Seconds
The Bosch Rexroth Indramat DDS02.2-W200-BE72-01-FW is a Digital AC Servo Drive Controller from the DDS Drive Controllers series. It features a SERCOS communication interface and supports both digital servo feedback and resolver feedback. The drive uses an internal air cooling method and is rated for 200 Amps of current.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The DDS02.2-W200-BE72-01-FW is a digital AC servo drive controller produced by Bosch Rexroth Indramat for the DDS Drive Controllers series. In an automation cell, the unit forms the closed-loop link between an Indramat power supply and the attached servo motor, modulating phase voltage so the motor follows command data from the higher-level PLC. By converting position and velocity setpoints into precise current patterns, it supports coordinated motion on packaging machines, printing presses, and material-handling axes. This allows the controller to regulate torque, speed, and position from the motor feedback device during operation. It is suited for motion systems that require repeatable axis response under changing load conditions.
The communication backbone is a SERCOS interface, which streams real-time setpoints and diagnostic data over fiber-optic rings while maintaining electrical isolation from noisy cabinet wiring. For motor excitation, the drive can deliver up to 200 A of continuous output current, giving it enough capacity for high-torque acceleration on large axes. Thermal management is handled through internal cabinet air cooling, so the heat sink uses air already circulating inside the enclosure and does not require external ducting. Position verification is processed from both digital servo feedback and resolver feedback, allowing the same controller to operate with modern encoder-equipped motors or older resolver-based motors without an added interface card. This combination broadens motor compatibility within existing DDS installations.
The control logic is delivered blank, and firmware must be ordered as a separate subitem. The unit carries Function ID Version 01, which sets the available feature group for this controller. Hardware belongs to Line 02, indicating the second design generation of the DDS platform power stage. The controller is specified as Version 2, which matches the updated component layout and connector arrangement used for this revision. These codes identify the hardware revision used in this controller and its place within the DDS product line.
Frequently Asked Questions about DDS02.2-W200-BE72-01-FW:
Q: What is the rated current of the DDS02.2-W200-BE72-01-FW drive controller?
A: The DDS02.2-W200-BE72-01-FW controller features a rated current of 200A for high power requirements.
Q: Which communication interface does the DDS02.2-W200-BE72-01-FW utilize?
A: The communication interface used on this drive controller is the SERCOS interface.
Q: How is the DDS02.2-W200-BE72-01-FW drive controller cooled?
A: This model is cooled by air drawn from inside the control cabinet using an internal cooling method.
Q: What types of motor feedback are supported by DDS02.2-W200-BE72-01-FW?
A: It supports both digital servo feedback and resolver feedback for motor positioning and monitoring.
Q: What is the Function ID Version for the DDS02.2-W200-BE72-01-FW drive controller?
A: The Function ID Version for this drive controller is 01, as determined by Indramat.
