Product Description:

The DDS02.2-W200-BE32-00 is a digital AC servo drive controller manufactured by Bosch Rexroth Indramat within the DDS Drive Controllers series. The unit coordinates torque, speed, and position loops for synchronous and induction motors used in automated cells, packaging lines, and material-handling axes. It functions as the interface between higher-level motion commands and bus-coupled motors, supplying regulated power and diagnostic feedback to support closed-loop operation. In normal use, the controller helps keep axis movement stable during acceleration, speed changes, and repeated positioning cycles across machines that depend on accurate motion control.

Its continuous output capacity is rated at 200 A, which is the maximum current the drive can supply to connected motors during continuous operation. The housing is rated IP20, so the unit must be installed inside a cabinet while remaining protected against contact with larger solid objects. Communication with the motion controller is handled through a SERCOS interface, allowing deterministic fiber-optic data exchange for synchronized multi-axis operation. Thermal management relies on internal air cooling, so the drive uses air from inside the control cabinet and requires sufficient panel ventilation. The drive is intended for ambient temperatures from 0 – 45 °C during operation.

For motor feedback, the controller supports digital servo feedback and resolver feedback, allowing it to process either high-resolution position data or analog rotor angle signals from different motor types. This flexibility makes the unit suitable for systems that use different motor families on separate axes. Installation is permitted up to 1000 m above sea level, and the unit can withstand storage temperatures from -30 – 85 °C when powered down. Within the DDS platform, it belongs to Line 02. The drive is Version 2, which identifies its product revision within this line.