Product Description:

The DDS02.2-W200-BE24-00 is a digital AC servo drive controller engineered by Bosch Rexroth Indramat for the DDS Drive Controllers series. It acts as the power and regulation stage between a motion controller and the motor, producing the commanded current waveforms that close torque, velocity, and position loops in automated machinery. Typical roles include coordinating multi-axis gantries, material-handling robots, and packaging stations where precise electrical drive regulation is required. Its role in the control chain allows the connected motor to respond quickly to changing load and motion demands during synchronized operation.

The unit delivers a continuous output of 200 A, supporting medium-to-high power servo axes without external current boosters. An enclosure rating of IP20 indicates finger-safe parts but no protection against liquids, so installation inside a sealed cabinet is necessary. Heat is removed by internal air cooling, meaning the controller relies on airflow from within the cabinet rather than direct exposure to shop air. Command and diagnostic data are exchanged over a SERCOS interface, allowing deterministic real-time communication with other drives and the supervisory PLC. The permissible operating temperature range is 0 to 45 °C, which supports full-load use in typical factory conditions. For feedback, the drive can interpret digital servo and resolver feedback, allowing either electronic encoder signals or analog resolver signals to be used without an additional interface module.

The controller can operate at altitudes up to 1000 m, which covers most standard indoor production sites. When powered down, it can be stored at temperatures from -30 to 85 °C, helping the unit tolerate common transport and warehouse conditions. The product is Version 2 in this design line, identifying the revision used for this controller. This version reference helps distinguish the unit within the DDS platform while keeping the description simple and clear.