Product Description:

The DDS02.2-W100-BE92-01-FW is a servo drive controller built by Bosch Rexroth Indramat and supplied in the DDS Drive Controllers series. It regulates AC servo axes in material-handling, packaging, and machining systems where accurate motion control is required. By converting setpoint commands into regulated motor current, the unit provides repeatable position, speed, and torque control at the axis. In multi-axis equipment, it supports tasks such as indexing, transfer, and synchronized machine cycles. This role places the drive between the motion controller and the connected motor so commanded movement can be translated into controlled mechanical output.

It communicates through the SERCOS interface, allowing synchronous cyclic data exchange with PLCs and related drives on the network. The power stage is rated for a continuous output of 100 A, so the connected motor, cabling, and bus supply must be sized for that current level. Cooling uses internal cabinet air cooling, which means cabinet airflow must remove heat without relying on outside air. Position feedback can be processed through digital servo feedback for high-resolution encoder systems, and the controller also supports resolver feedback for compatible legacy motors. This allows the same control platform to operate with different motor feedback types without an additional interface card.

The drive logic carries Function ID 01, which sets the permitted parameter range and motion functions for this version. The unit is part of Line 02 and uses Build 2, identifying its design status within the product range. Bosch Rexroth Indramat classifies it as a Digital AC Servo Drive Controller, so it is intended for closed-loop servo regulation rather than open-loop inverter operation. This structure keeps the control section, option modules, and rated current section aligned for the intended application.