DDS02.2-W100 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911310560
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat DDS02.2-W100 is a Digital AC Servo Drive Controller from the DDS Drive Controllers series. It features a rated current of 100 Amps and has internal air cooling from inside the control cabinet. The unit has an IP20 protection category and operates in temperatures ranging from 0 to 45 degrees Celsius.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The DDS02.2-W100 belongs to the DDS Drive Controllers series manufactured by Bosch Rexroth Indramat. It is a digital AC servo drive controller that converts incoming power into a regulated three-phase motor output for precise torque and speed control on connected servo or induction motors. By adjusting output current and voltage in real time, it helps the motor respond smoothly to changing load conditions during acceleration and deceleration. In an automation cell, the controller is mounted in a multi-axis rack and exchanges process data with higher-level controls so coordinated motion can be maintained on pick-and-place arms, printing cylinders, or conveyor axes that require repeatable positioning.
The unit uses internal air cooling, so cabinet airflow must remove switching losses from the enclosure and keep heat from building up around neighboring modules. A continuous output of 100 A is available, allowing the drive to supply large motors or several smaller axes linked through a shared DC bus during demanding motion cycles. Its housing has an IP20 rating, which guards live parts from touch, and it operates in ambient air from 0–45 °C without derating inside that range. Because the drive depends on cabinet-based airflow rather than a sealed standalone enclosure, overall protection from dust and liquids must come from the machine cabinet. Installation altitude is limited to 1000 m above sea level because lower air density reduces cooling efficiency.
When the machine is powered down, safe storage is allowed between -30–85 °C. This storage window is intended for the unpowered unit and supports transport or warehouse staging without additional conditioning. The product is part of Line 02, and the unit is Version 2. These codes indicate the controller revision used within the DDS line and keep the product description tied to the correct build.
Frequently Asked Questions about DDS02.2-W100:
Q: What cooling method is used by the DDS02.2-W100 drive controller?
A: The DDS02.2-W100 uses internal air cooling drawn from inside the control cabinet.
Q: What is the maximum installation elevation for the DDS02.2-W100?
A: This servo drive controller supports a maximum installation elevation of 1000 meters.
Q: What is the allowed operating temperature range for the DDS02.2-W100?
A: The drive controller operates within a temperature range of 0 to 45°C.
Q: What is the rated current specification of the DDS02.2-W100?
A: The DDS02.2-W100 is rated for a continuous current of 100A.
Q: What protection category does the DDS02.2-W100 provide?
A: This model features an IP20 protection category.
