DDS02.2-A200-BE37-01-FW
MPN: R911267845
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 3-5 Days
The DDS02.2-A200-BE37-01-FW Servo Drive is manufactured by Bosch Rexorth Indramat. The drive operates with External Cooling, 200 A rated current, and Digital Servo and Resolver Feedback.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The DDS02.2-A200-BE37-01-FW is a highly advanced industrial control device produced by Rexroth Indramat under ideal industrial conditions. It is manufactured according to American and European quality standards; it also features a modular design that allows the operator to easily replace faulty parts of the drive controller without needing to reconfigure the whole servo system. Before this drive controller is supplied to the operator for use, it is tested and certified to meet the American and European quality standards; it is also supplied with a type label that contains important information that can be used to identify the controller as soon as it supplied to the operator. This industrial controller contains special slots labeled U1 to U5; these slots are intended for special configurational hardware and firmware modules.
The DDS02.2-A200-BE37-01-FW industrial controller operates with a continuous input current of about 65 Amperes and a maximum input current of about 200 amperes. This controller connects to the industrial motor through two major types of electrical cables; special power cables and motor feedback cables. The bus voltage used by this industrial controller is about 300 volts. During operation, this industrial controller generates a leakage current of about 3.5 millimeters. To prevent electrical accidents, operators should ensure the controller should be properly grounded before operation.
The DDS02.2-A200-BE37-01-FW industrial controller requires the connection of special accessories for optimum operation; these accessories include the power supply unit, electrical cables, and an external fuse. The permissible temperature range at which this industrial should be operated falls between 0 to about 40 degrees Celsius; operating this controller above this temperature can cause a significant reduction in the efficiency of the controller.
