DDS02.2-A200-BE32-01-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911278486
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat DDS02.2-A200-BE32-01-FW is a Digital AC Servo Drive Controller from the DDS Drive Controllers series. This controller operates with a rated current of 200 Amps and IP20 protection. It supports SERCOS communication and utilizes air cooling drawn from outside the control cabinet.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The DDS02.2-A200-BE32-01-FW is manufactured by Bosch Rexroth Indramat for the DDS Drive Controllers series. As a digital AC servo drive controller, it links motion controllers with servo motors and delivers controlled three-phase output that follows commanded torque and velocity profiles. This arrangement supports positioning, indexing, and speed-regulated motion in automated equipment. Because it is a cabinet-mounted controller rather than a motor-integrated unit, power conversion and loop control remain centralized in the drive enclosure. That layout is common in machines that place several servo axes side by side on shared cabinet panels.
This controller communicates with higher-level equipment through a SERCOS interface, enabling deterministic data exchange for synchronized multi-axis motion. Thermal energy is removed by external air cooling, so incoming cabinet air passes across the heat sink and exits without recirculation, and the enclosure layout must maintain clear airflow paths. Drive output is sized for up to 200 A of continuous motor current, allowing the power stage to support demanding servo loads and larger motor frames. The housing meets the IP20 protection category, so it is finger-safe but must be installed in a closed electrical cabinet. For position verification and commutation, the control board accepts digital servo feedback and resolver feedback, so the same drive can operate motors equipped with either feedback type.
The controller is intended for ambient temperatures from 0 to 45 °C, and a maximum installation height of 1000 m helps maintain normal cooling performance in typical indoor factory settings. During storage or transit, the electronics tolerate temperatures from -30 to 85 °C, allowing unpowered units to be kept in unconditioned spaces before installation. These limits suit production areas that remain within normal indoor industrial conditions while keeping the electronics protected inside the cabinet. The unit carries Function ID 01 and is Version 2, which identifies the product revision used for this drive type and its matching option-card set.
Frequently Asked Questions about DDS02.2-A200-BE32-01-FW:
Q: What type of communication interface does the DDS02.2-A200-BE32-01-FW controller use?
A: The DDS02.2-A200-BE32-01-FW communicates using the SERCOS interface for real-time automation applications.
Q: How is the DDS02.2-A200-BE32-01-FW drive controller cooled?
A: Cooling for this model is achieved by using air drawn from outside the control cabinet.
Q: What feedback options does the DDS02.2-A200-BE32-01-FW support?
A: This unit supports both digital servo feedback and resolver feedback for motor control.
Q: What is the rated current of the DDS02.2-A200-BE32-01-FW?
A: The rated current for the DDS02.2-A200-BE32-01-FW drive controller is 200A.
Q: What is the operating temperature range for the DDS02.2-A200-BE32-01-FW drive controller?
A: This controller operates within an ambient temperature range of 0 to 45°C.
