Product Description:

The DDS02.2-A100-BE23-01 is manufactured by Bosch Rexroth Indramat as part of the DDS Drive Controllers series. This unit belongs to line 02 and carries function ID 01. It functions as a digital AC servo drive controller, converting three-phase power into modulated output for industrial motors used in packaging, handling, and machining cells. When connected to a SERCOS-based motion network, the drive synchronizes torque, speed, and position loops in real time across multiple axes. That control behavior supports coordinated starts, stops, and contouring moves while maintaining stable response under changing loads in automated equipment.

Its communication backbone relies on the SERCOS interface, which supports real-time drive commands and diagnostic data exchange with the PLC. Thermal management is handled by external air cooling, meaning ambient air from outside the cabinet passes across the heat sink instead of recirculating internal air. The power stage supports a continuous output of 100 A, so the controller can run high-torque servomotors without current derating. The enclosure has an IP20 rating, so cabinet installation is required to prevent accidental contact with live parts. For position verification, the drive accepts digital servo feedback in addition to resolver signals, allowing it to work with modern absolute encoders as well as older motor feedback systems. Support for both feedback formats also helps when the controller is paired with different motor generations on existing production equipment.

The controller operates at ambient temperatures from 0 to 45 °C. It can be stored or transported between -30 to +85 °C without damage to electronic components. Continuous operation is permitted up to 1000 m above sea level, and higher elevations may require current or temperature derating. These temperature and altitude limits apply during normal installed use. The unit is Version 2, which identifies this product revision within the product line.