Product Description:

The DDS02.1-W200-DS63-00-FW is a digital AC servo drive controller produced by Bosch Rexroth Indramat within the DDS Drive Controllers series. Installed between the supply module and the servo motor, it modulates three-phase output in response to velocity and position commands from a higher-level PLC. The drive interprets those commands and converts supply-bus power into controlled motor current for accurate axis movement. By handling closed-loop current and speed regulation, the unit supports precise torque, speed, and position control in assembly lines, packaging machines, and material-handling stations. This operating role makes it suitable for automation tasks that require repeatable motion under changing load conditions.

To exchange real-time setpoints and diagnostics, it includes a SERCOS interface, which supports fiber-optic ring communication with the motion system. The controller can deliver up to 200 A of continuous output current. Its IP20 housing requires installation inside a sealed cabinet. Heat is removed by air cooling from inside the control cabinet, so the cabinet ventilation must carry away the drive's thermal losses. Rotor position is returned through digital servo feedback, allowing the controller to correct motor output as operating conditions change. Electrical components remain within their intended operating range when the ambient temperature stays between 0 to 45 °C.

Mounting height is limited to 1000 m above sea level, because reduced air density can lower cooling effectiveness around power components. When the machinery is idle, the unit can be stored at temperatures from -30 to 85 °C without harming capacitors or control boards. This storage range supports unpowered transport and warehouse conditions before installation. The controller belongs to Line 02 and is Version 1.