Product Description:

The DDS02.1-W200-DS01-02-FW is a drive controller manufactured by Bosch Rexroth Indramat and assigned to the DDS Drive Controllers series. As a digital unit, it regulates three-phase servo or induction motors in automated machinery by supplying controlled current and processing feedback in a closed loop. Within an automation cell, the controller links a higher-level motion CPU to the motor windings and converts command values into torque-producing output. This lets the axis react quickly to changing position and speed demands during normal machine operation. In automated handling, packaging, and transfer systems, this type of control helps keep motion stable during acceleration, constant speed, and deceleration.

The controller exchanges process data through a SERCOS interface, allowing deterministic command cycles and synchronized multi-axis operation. Thermal limits are managed by internal air cooling, so cabinet air passes across heat-producing components without external ducting. Rotor position and speed are received through digital servo feedback, which gives the drive precise information for closed-loop regulation. Under continuous operation, the power stage can deliver 200 A of rated output current for large motor loads. That current capacity supports high-torque axes that run continuously rather than only in short peaks. It is a Digital AC Servo Drive Controller that modulates motor output through high-frequency PWM.

The controller uses Function ID 01, which identifies the assigned control function for this unit. It belongs to Line 02, and the product revision is version 1. Application-specific functions are provided through a separate software item selected for the required axis behavior. These identifiers distinguish the unit within the series and help match it with the proper software and option modules. The basic electrical layout remains consistent within the DDS platform while the installed function set stays tied to the intended motor application.