Product Description:

The DDS02.1-W150-DL05-01-FW is a digital AC servo drive controller produced by Bosch Rexroth Indramat and assigned to the DDS Drive Controllers series. The unit interfaces with compatible servo motors to regulate torque, speed, and position in automated machines and production cells. Installed inside a control cabinet, it combines power electronics with motion control logic to close the velocity and position loops required for precise axis handling. This controller processes commands from higher-level PLCs and delivers controlled three-phase output to Indramat servo motors, making it suitable for packaging lines, material-handling gantries, and CNC auxiliary axes.

The drive executes motion orders through a communication interface configured for single-axis position control, so one controller governs one mechanical axis without sharing resources. During operation, it can supply up to 150 A of continuous output current, which sets the available output for the connected motor. Cooling uses internal cabinet air cooling, meaning heat is removed by circulating enclosure air rather than drawing it from the plant floor. Electrical parts are protected to IP20, which helps prevent accidental contact with live components but still requires installation in a closed cabinet. Motor state is returned to the regulator through digital servo feedback, allowing high-resolution closed-loop regulation and detection of position errors.

The permitted ambient range is 0 to 45 °C, while storage and transport temperatures can span -30 to 85 °C, so the hardware can be stored in unheated areas but should be operated only within normal shop-floor conditions. Installation is allowed up to 1000 m above sea level without derating, which suits most industrial facilities. The product is part of line 02, carries Function ID version 01, and uses hardware Version 1 for parameter and diagnostic compatibility.