Product Description:

The DDS02.1-W150-DA02-01-FW is a drive controller produced by Bosch Rexroth Indramat within the DDS Drive Controllers series. In an automated cell, this unit governs a compatible AC servo motor by regulating power, monitoring feedback, and exchanging setpoint data with a higher-level PLC. Installed in a control cabinet, it supplies the torque and velocity commands needed to keep pick-and-place axes, packaging tables, and printing drums synchronized with the machine cycle. The controller also manages the interaction between incoming command signals and motor response so motion remains stable during acceleration, deceleration, and steady running.

The drive can deliver a continuous output of 150 A. Command values reach the controller through its analog interface, which supports ±10 V speed references and 4–20 mA torque commands from legacy motion cards. Rotor position is supplied through digital servo feedback, allowing the control loop to calculate precise commutation angles during rapid reversals and changing loads. Heat from the power stage is removed by internal air cooling, so the cabinet needs a clear airflow path even though the drive does not require an external blower. The unit belongs to Line 02 of the platform, and products in that design line use the same mounting dimensions. This layout helps the controller fit established cabinet arrangements without changes to the mounting pattern.

The controller uses Function ID Version 01, so the available parameter structure remains consistent for the supported control functions. Its power electronics are marked as Version 1. These identifiers help match the drive with the correct documentation and service data when operating behavior is reviewed or compatibility within an existing system is checked. Clear version coding also helps keep parameter records aligned with the installed hardware during long-term use.