Product Description:

The DDS02.1-W150-DA01-00 is a drive controller from Bosch Rexroth Indramat in the DDS Drive Controllers series. Intended for cabinet-mounted use, the unit links the machine control layer to a servo motor so velocity and torque can be regulated on production lines, packaging modules, and handling stations. It converts control commands into controlled electrical output for the connected axis, which helps keep motion repeatable during indexing, feeding, and transfer tasks. By matching commanded setpoints to motor demand, it helps synchronize axes and maintain consistent cycle timing in multi-axis systems. It is suited to layouts where drive hardware is grouped in a central enclosure and the motors are wired back to the control cabinet.

In operation, the controller is categorized as a Digital AC Servo Drive Controller, so it uses pulse-width-modulated output stages to energize connected motor phases. Command values enter through its analog interface, which suits master controls that supply ±10 V velocity or torque references. Thermal management relies on internal air cooling, and cabinet airflow carries heat away from the power electronics without external heat sinks. The power section is rated for 150 A continuous current, allowing the unit to drive large-frame servo motors under sustained load. Position and speed are returned through digital servo feedback, allowing closed-loop regulation with encoder-based correction and stable response during changing loads. This arrangement lets the controller compare commanded motion with actual motor response in real time and correct deviations as operating conditions change.

The unit is part of Line 02 and carries Function ID 01 with Version 1. These identifiers indicate the specific control variant used by this module within the DDS platform. They distinguish this version from other controller combinations that use different command inputs or operating features. This keeps the description focused on the exact variant without repeating the electrical or cooling details already stated.