DDS02.1-W150 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911269236
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat DDS02.1-W150 is a digital AC servo drive controller from the DDS Drive Controllers series with a rated current of 150 Amps. It features internal air cooling from inside the control cabinet and provides protection rated at IP20. The controller is designed to operate at elevations up to 1000 meters and in temperatures from 0 to 45°C.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The DDS02.1-W150 is a drive controller produced by Bosch Rexroth Indramat within the DDS Drive Controllers series. Designed for cabinet mounting, the unit interfaces with Indramat power supplies and fieldbus networks in centralized motion systems. It regulates torque, speed, and position of synchronous and induction motors that drive conveyor sections, tooling axes, and automated packaging stations on factory floors. This arrangement lets the drive act as the control link between the incoming power section and the motor connected to the machine axis.
Its continuous output capability is 150 A, permitting the module to energize medium-to-large motors without external current boosters. Thermal management relies on air from inside the control cabinet, so enclosure airflow must move past the heat sink to carry away waste heat during sustained operation. Because cooling air is taken from the enclosure, cabinet ventilation has a direct effect on thermal stability. An IP20 protection category indicates that the electronics are shielded from solid objects larger than 12 mm, but there is no protection against water entry, so the unit must remain inside a suitable cabinet. The permissible ambient range of 0 – 45 °C supports normal operation, and the controller can be installed at heights up to 1000 m before cooling and dielectric limits begin to reduce available performance.
The controller can be stored safely between −30 to +85 °C, allowing shipment or spare inventory in unconditioned warehouses without damage to capacitors or solder joints. Within the DDS architecture, it belongs to line 02. The product is Version 1 and is classified as a Digital AC Servo Drive Controller, using onboard processing to convert feedback signals into real-time PWM patterns for the connected power stage. That control method allows the drive to react quickly to changing command values and motor feedback while maintaining closed-loop motor control under changing load conditions.
Frequently Asked Questions about DDS02.1-W150:
Q: What is the rated current of the DDS02.1-W150 drive controller?
A: The DDS02.1-W150 provides a rated current output of 150A.
Q: How is the DDS02.1-W150 drive controller cooled?
A: This model uses internal air cooling by drawing air from inside the control cabinet.
Q: What is the maximum installation elevation for the DDS02.1-W150?
A: The DDS02.1-W150 is designed to operate at elevations up to 1000 meters.
Q: What is the operating temperature range for the DDS02.1-W150?
A: The DDS02.1-W150 can be operated in environments with temperatures ranging from 0 to 45°C.
Q: What level of protection does the DDS02.1-W150 provide?
A: This unit is classified under the IP20 protection category, offering limited protection against solid objects and no protection against liquids.
