Product Description:

The DDS02.1-W100-DS63-01-FW is a digital drive controller manufactured by Bosch Rexroth Indramat and assigned to the DDS Drive Controllers series. Installed inside a control cabinet, the unit supplies regulated three-phase power to matched servo motors. It supports coordinated motion in automated machinery, packaging lines, and material-handling stations. Its control function allows the connected axis to follow commanded speed and position values during repetitive machine cycles. By combining power conversion and axis regulation in one housing, the controller helps keep multi-axis cabinet layouts compact.

This controller exchanges real-time axis data through the SERCOS interface, allowing deterministic communication with higher-level PLCs. Heat produced by the output stage is removed by internal air cooling, so cabinet airflow must be maintained to keep semiconductors within their thermal limits. Because the cooling air is drawn from inside the cabinet, enclosure ventilation directly affects thermal stability during continuous operation. The drive can continuously deliver a motor armature current of 100 A. Position and velocity loops are closed by digital servo feedback, enabling fine resolution of rotor angle and rapid correction of following error during acceleration and deceleration. The unit is a Digital AC Servo Drive Controller with integrated power electronics, signal conditioning, and a microprocessor-based regulator in one module.

The drive belongs to Function ID 01. It is part of Line 02, and the unit is Version 1. These identifiers distinguish the controller within the product range and separate it from units that use other feedback types, current classes, or communication options. Within the DDS platform, the codes are used to identify the design line and release level of this controller.