DDS02.1-W100-DS04-01 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911259409
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
23 Seconds
The Bosch Rexroth Indramat DDS02.1-W100-DS04-01 is a digital AC servo drive controller from the DDS Drive Controllers series. It features a SERCOS communication interface and supports digital servo feedback. The controller uses internal air cooling and has a rated current of 100 Amps with IP20 protection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The DDS02.1-W100-DS04-01 is a servo drive controller produced by Bosch Rexroth Indramat as part of the DDS Drive Controllers series. Installed inside a control cabinet, this unit regulates the power supplied to AC servomotors so automated equipment can achieve accurate speed, torque, and position control. By converting command signals into precisely timed output pulses, it maintains repeatable motion profiles that support assembly, packaging, and material-handling tasks in industrial automation. This closed-loop regulation helps the connected motor respond smoothly to changing loads during indexing and continuous-motion processes.
Within the drive, the continuous output capability is rated at 100 A, so matched motors can accelerate quickly without exceeding thermal limits. The housing carries an IP20 protection category, which limits contact with internal parts inside the control cabinet. Networked motion commands are exchanged over the SERCOS interface, a fiber-optic bus that supports multi-axis synchronization and deterministic data transfer. Heat generated during switching is removed through internal air cooling, which draws cabinet air across the heat sink. This arrangement helps keep the power stage stable during repeated acceleration and deceleration. The specified service window is 0 – 45 °C, which is the ambient range for nominal current and timing accuracy. The unit is a digital AC servo drive controller and belongs to Line 02 with Function ID 04 and Function ID version 01.
Altitude also affects thermal behavior, and the controller may be mounted up to 1000 m above sea level without derating. Long-term storage is supported by a temperature range of -30 to 85 °C when the unit is not in operation. Motor position data is exchanged through digital servo feedback, allowing the drive to close the velocity and position loops internally with high resolution. This feedback path lets the controller correct speed deviations as load conditions change during operation. The hardware revision is version 1.
Frequently Asked Questions about DDS02.1-W100-DS04-01:
Q: What communication interface does the DDS02.1-W100-DS04-01 use?
A: The DDS02.1-W100-DS04-01 supports SERCOS interface for communication with other devices.
Q: How is the DDS02.1-W100-DS04-01 drive cooled during operation?
A: Cooling for this drive is achieved through internal air circulation within the control cabinet.
Q: What is the maximum installation elevation for the DDS02.1-W100-DS04-01?
A: This unit can be installed at elevations up to 1000 meters above sea level.
Q: What type of motor feedback does the DDS02.1-W100-DS04-01 use?
A: The DDS02.1-W100-DS04-01 handles digital servo feedback as its motor feedback method.
Q: What is the operating temperature range for the DDS02.1-W100-DS04-01 drive controller?
A: This drive controller operates within an ambient temperature range of 0 to 45°C.
