Product Description:

Bosch Rexroth Indramat manufactures the DDS02.1-W100-DL20-00, a member of the DDS Drive Controllers series. The unit is a digital AC servo drive controller intended to operate synchronous or induction servomotors in automated machinery. By processing incremental feedback and stored drive parameters, it regulates torque and velocity loops so actuators can follow commanded motion profiles with very short response times. Within an automation cell, the controller serves as the interface between higher-level PLC motion commands and the motor power stage, allowing coordinated multi-axis tasks while using only one axis slot.

The communication layer is configured for single-axis position control, so the controller manages motion for one motor at a time. Thermal management relies on internal air cooling, which draws cabinet air across the heat sink instead of requiring external ducted airflow. The unit provides a continuous output of 100 A, so the connected motor and application load must remain within that current capacity. The housing carries an IP20 rating, which provides finger-safe access protection and is intended for installation inside a closed control cabinet. Ambient operation is permitted from 0 - 45 °C, allowing normal use in standard industrial indoor conditions.

Feedback handling is based on digital servo feedback, allowing high-resolution position data to be sampled for stable closed-loop control. Installation altitude is limited to 1000 m, because thinner air above that level reduces cooling effectiveness. Long-term storage is permitted from -30 - 85 °C, which supports transport and warehouse storage across a broad temperature range. The unit is supplied as Version 1, which identifies the product revision used for this model. This combination of feedback processing, thermal limits, and enclosure protection makes the controller suitable for cabinet-mounted servo applications that require accurate motion control.