DDS02.1-W100-DA14-01-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911270583
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
5 Seconds
The Bosch Rexroth Indramat DDS02.1-W100-DA14-01-FW is a digital AC servo drive controller that is part of the DDS Drive Controllers series. It features an analog communication interface and supports digital servo feedback for motor feedback. The controller has a rated current of 100 Amps and uses internal air cooling from within the control cabinet.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The DDS02.1-W100-DA14-01-FW is a servo drive produced by Bosch Rexroth Indramat as part of the DDS Drive Controllers series. It occupies a single slot in a modular DIAX04 rack, which helps keep multi-axis cabinets compact while leaving room for additional control and power modules. The drive interfaces with a higher-level motion controller to energize synchronous and induction motors used on automated conveyors, pick-and-place gantries, and tooling spindles. By converting DC bus power into regulated three-phase output, it supports the closed-loop speed and position control needed for repeatable cycle-based manufacturing. Its rack-based format also suits machines where several coordinated axes are installed side by side on a shared drive platform.
The drive exchanges command values through an analog interface, which allows velocity or torque references to be sent from control systems that use conventional analog signaling. This arrangement is useful in retrofit systems where existing PLC outputs already provide analog command values. Continuous output capability reaches 100 A, so matched motors can accelerate larger inertial loads while maintaining stable current delivery under sustained demand. Rotor position is returned over digital servo feedback, giving the control loop high-resolution incremental data for responsive correction during motion. Thermal energy is removed by internal air cooling, so cabinet ventilation must carry heat away from the drive and maintain acceptable operating temperature around adjacent modules.
The controller carries Function ID Version 01, which identifies the installed control-function revision used by this model. It is assigned to Line 02 of the DDS platform, so it matches the mechanical format and bus arrangement used by other units in that line. The hardware revision is marked as Version 1. These identifiers distinguish the unit from other DDS versions that use different interfaces or control options, and they help confirm compatibility within the same product platform.
Frequently Asked Questions about DDS02.1-W100-DA14-01-FW:
Q: What is the rated current output of the DDS02.1-W100-DA14-01-FW drive controller?
A: The DDS02.1-W100-DA14-01-FW provides a rated current of 100A for connected servo motors.
Q: What type of motor feedback does the DDS02.1-W100-DA14-01-FW support?
A: This drive controller uses a digital servo feedback system for accurate motor position and speed monitoring.
Q: What type of communication interface is included on the DDS02.1-W100-DA14-01-FW drive controller?
A: The DDS02.1-W100-DA14-01-FW is equipped with an analog communication interface for integration with compatible machinery.
Q: How is the DDS02.1-W100-DA14-01-FW drive controller cooled during operation?
A: Internal air cooling from within the control cabinet is used in this model to manage operational temperatures.
Q: What is the function ID version for the DDS02.1-W100-DA14-01-FW drive controller?
A: The function ID version for this unit is 01, as determined by Indramat and not changeable by the user.
