DDS02.1-W050-DS01-01-FW Bosch Rexroth Indramat
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat DDS02.1-W050-DS01-01-FW is a digital AC servo drive controller and part of the DDS Drive Controllers series. It features a SERCOS communication interface, supports digital servo feedback, and operates at a rated current of 50 Amps. The drive has an IP20 protection category and uses internal air cooling from inside the control cabinet.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The DDS02.1-W050-DS01-01-FW is a digital AC servo drive controller manufactured by Bosch Rexroth Indramat for the DDS Drive Controllers series. It is used in industrial automation to energize and govern synchronous or asynchronous servo motors, translating control commands into precisely modulated current so axes hold position, follow velocity profiles, or deliver closed-loop torque during continuous machine operation. This operating role suits coordinated handling, packaging, and transfer systems that depend on repeatable motion under changing loads. The controller uses Digital servo feedback, allowing it to process encoder signals directly and maintain closed-loop position regulation without external converter modules.
It communicates with higher-level motion systems through a SERCOS interface, enabling synchronized setpoint updates, cyclic command exchange, and diagnostic messaging across multi-axis networks. The drive supplies a continuous phase current of 50 A, which indicates the current available during steady operation without exceeding the intended thermal limit of the power stage. Heat is removed by internal cabinet air cooling, so cabinet airflow must move heat away from the drive when modules are installed close together in a rack. The housing is rated IP20, which protects against accidental finger contact and requires installation inside an enclosed electrical panel when dust or fluids are present nearby. The electronics are intended to operate between 0–45 °C, and higher ambient temperatures require derating or added cooling capacity.
Installation altitude may reach 1000 m without performance correction, which covers most plant floor elevations. For shipment or warehouse storage, the hardware tolerates temperatures from -30–85 °C, helping protect the unit during transport and non-operating periods in unconditioned spaces. The unit carries Function ID 01 and version 1, indicating the assigned function set for this control variant. These identifiers distinguish the drive within the DDS platform without changing its basic operating role.
Frequently Asked Questions about DDS02.1-W050-DS01-01-FW:
Q: What type of communication interface does the DDS02.1-W050-DS01-01-FW support?
A: This model operates with a communication interface using SERCOS, enabling high-speed digital connection with compatible automation systems.
Q: What is the rated current for the DDS02.1-W050-DS01-01-FW drive controller?
A: The DDS02.1-W050-DS01-01-FW provides a rated current of 50A for efficient drive operation.
Q: How is the DDS02.1-W050-DS01-01-FW cooled during operation?
A: This drive controller is designed to function within an internal air-cooled control cabinet configuration.
Q: What type of motor feedback does the DDS02.1-W050-DS01-01-FW utilize?
A: The DDS02.1-W050-DS01-01-FW supports digital servo feedback for accurate motor control.
Q: What is the maximum installation elevation for the DDS02.1-W050-DS01-01-FW?
A: The DDS02.1-W050-DS01-01-FW is specified for use at elevations up to 1000 meters above sea level.