Product Description:

The DDS02.1-W050-DL01-00 is a digital AC servo drive controller produced by Bosch Rexroth Indramat in the DDS Drive Controllers series. It regulates torque, speed, and position of synchronous or induction servomotors within multiaxis machinery. Mounted inside control cabinets, the unit exchanges status data with higher-level automation devices and executes axis commands so that mechanical stages, conveyors, and handling modules operate with repeatable precision. Closed-loop control helps the axis respond consistently to changing loads during acceleration, positioning, and speed transitions.

The drive delivers up to 50 A of continuous output current, supplying sufficient armature power for medium-frame motors without external boosters. Heat generated at that current is removed by internal air cooling, meaning cabinet air is drawn across the heatsink instead of relying on an external blower. The enclosure is rated IP20, so the controller must be installed in a cabinet to limit contact with dust or tools. Reliable electronic behavior is maintained in ambient temperatures from 0 to 45 °C, and no thermal derating is required within that range. Position feedback from the motor is processed as digital servo feedback, allowing the controller to compute high-resolution velocity loops. Motion commands arrive through a single-axis position control interface that accepts setpoints directly from a PLC or motion card.

Mechanical components such as capacitors and relays remain suitable for operation up to 1000 m above sea level, which covers most factory elevations without modification. When the machine is idle, the unit can be stored between -30 to 85 °C without loss of calibration, which supports transport and warehouse storage. The drive is Version 1, identifying the product revision used for this controller. Using the correct revision helps maintain expected operating behavior and diagnostic compatibility within the machine.