Product Description:

The DDS02.1-W015-DL02-00 is a drive controller produced by Bosch Rexroth Indramat and assigned to the DDS Drive Controllers series. It serves as the electronic interface between a servo motor and the plant control system, converting command signals into regulated current and voltage for precise axis motion in industrial automation tasks. Command information reaches the controller through a single-axis position control interface, so one mechanical axis can be advanced, held, or returned under direct position-loop supervision. Because the control loop is handled inside the drive, the unit can respond quickly to position commands and correct load-related deviations during motion.

During operation, the unit delivers a rated output of 15 A, which is the continuous phase current the connected motor can draw without thermal derating. Rotor data are returned via digital servo feedback, allowing the internal regulator to synchronize electrical output with actual shaft movement. This feedback path helps the drive maintain stable positioning and smooth speed regulation during changing load conditions. Thermal energy is removed by air from inside the control cabinet, so the installation depends on cabinet ventilation rather than external ducts. The housing carries an IP20 rating, which protects against finger contact and small foreign objects but not directed water. Reliable circuitry performance is maintained within an ambient range of 0 to 45 °C, making the unit suitable for standard indoor industrial environments.

The controller retains stable characteristics up to 1000 m above sea level, after which cooling and insulation margins should be reviewed for the installation. When machinery is powered down, components may be stored between -30 to 85 °C without damage to electronic parts or seals. These limits cover normal factory elevations and powered-down storage during transport or warehousing. This model belongs to Line 02 and is version 1.