Product Description:

The DDS02.1-W015-DA14-00 is a digital AC servo drive controller produced by Bosch Rexroth Indramat for the DDS Drive Controllers series. Installed inside a machine control cabinet, the unit receives command signals from higher-level motion processors and regulates power to synchronous motors in assembly lines, packaging equipment, and material-handling axes. It translates velocity or torque requests into controlled three-phase output, forming the interface between industrial control logic and electromechanical motion. Its integrated power and control functions support compact cabinet layouts where accurate, repeatable axis response is required.

Its communication layer uses an analog interface, so setpoint voltages or currents are handled as continuous electrical signals rather than fieldbus packets. The drive delivers a continuous output of 15 A, and this rated current is the maximum motor phase current the power stage can supply without thermal derating. Heat is removed by internal air cooling, meaning the device depends on cabinet airflow instead of a separate blower mounted on the unit. The housing is rated IP20, which is suitable for finger-safe installation in enclosed indoor panels. Rotor position data is returned through digital servo feedback, allowing the controller to close position and velocity loops with single-turn or multi-turn encoders.

Continuous operation is supported in an ambient range of 0 to 45 °C, while storage is permitted from -30 to 85 °C when the unit is not operating. Cabinet installation is permitted up to 1000 m above sea level, and higher elevations may require derating or improved cooling because lower air density reduces heat removal. These limits should be considered when the drive is mounted near other heat-generating components inside the enclosure. The product is part of line 02 and is supplied as version 1, matching the mechanical format used for this DDS generation.