Product Description:

The DDS02.1-W015-D is a servo drive controller developed by Bosch Rexroth Indramat and placed within the DDS Drive Controllers series. Designed for integration in multi-axis machining centers, material-handling cells, and packaging lines, this controller interfaces between a power supply and a synchronous or induction motor, converting command signals into regulated current for precise motion. Within an automation cabinet, it occupies a modular slot and communicates with a higher-level control through serial links. This arrangement lets the drive manage the current loop locally so the connected motor can respond quickly to load changes and commanded speed or torque changes.

The drive’s continuous output capacity is 15 A, meaning the connected motor can draw that current without the module exceeding its thermal limits. Heat is removed by air from inside the control cabinet, so the installation must provide adequate internal airflow rather than rely on external fans. Position and velocity information is returned through digital servo feedback, allowing the control loop to calculate exact phase currents. The housing carries an IP20 rating, and the electronics operate reliably within 0 to 45 °C. Because of this enclosure style, the unit is intended for mounting inside a protected cabinet rather than for direct exposure to dust or liquids on the machine.

During transport or warehouse storage, the unit withstands ambient temperatures from -30 to 85 °C without component damage, and operation is permitted at sites up to 1000 m above sea level before derating is considered. The controller belongs to Line 02, and the design iteration is Version 1. These identifiers distinguish the product generation used in the DDS platform. Storage at the stated temperature range does not imply powered operation, which remains limited to the specified ambient operating range.