Product Description:

The DDS02.1-K150-DS06-00/S002 is a digital AC servo drive controller built by Bosch Rexroth Indramat and part of the DDS Drive Controllers series. The unit regulates three-phase servo motors in automated machinery by converting command data from the control level into precisely metered output current. It is intended for applications that require stable axis response during repeated starts, stops, and speed changes. Its design supports real-time motion coordination in packaging lines, material handling systems, and other industrial axes where closed-loop speed and torque control are required.

Communication with the higher-level control system occurs over the SERCOS interface, which provides deterministic cyclic data exchange for position and parameter updates. The power stage delivers a continuous output of 150 A, so the connected motor can accelerate heavy loads without saturating the drive. An enclosure rating of IP20 indicates that the electronics are finger-safe once installed inside a cabinet but are not sealed against airborne contaminants. The permissible ambient operating window of 0 to 45 °C prevents thermal derating in standard control rooms, while digital servo feedback from the motor transducer enables the controller to close current, velocity, and position loops in real time.

For panel installation, the permitted altitude reaches 1000 m, allowing use in most plant locations without additional cooling adjustments. During transport or extended shutdowns, the drive tolerates ambient temperatures from -30 to +85 °C, which helps protect internal components against warehouse extremes. Within the product hierarchy, the controller belongs to Line 02, and the unit is Revision 1. These identifiers distinguish the controller within the DDS platform and support correct matching with compatible system modules.