DDS02.1-F200-DL01-01-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911271798
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
14 Seconds
The Bosch Rexroth Indramat DDS02.1-F200-DL01-01-FW is a digital AC servo drive controller in the DDS Drive Controllers series. It features single-axis position control and digital servo feedback, with a rated current of 200 Amps. The drive uses coolant for cooling and has an IP20 protection category, operating in temperatures from 0 to 45°C and at elevations up to 1000 meters.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The DDS02.1-F200-DL01-01-FW drive controller is produced by Bosch Rexroth Indramat for the DDS Drive Controllers series. The unit is part of Line 02 and is released as Version 1, where it links a machine control system to an Indramat servo motor in multi-axis assemblies. It executes commanded motion profiles with closed-loop control and keeps parameter mapping consistent through Function ID 01 and Function ID version 01. In these assemblies, it works as the power stage between the control system and the motor, helping the axis follow commanded speed and torque with repeatable response. By converting low-voltage control signals into regulated three-phase power, it maintains precise motion in industrial automation cells.
The controller delivers up to 200 A of continuous output current, allowing it to energize large-frame synchronous motors without derating. This current capacity suits applications that use larger motors and sustained dynamic loads. Internal power electronics are shielded only against finger contact because the housing carries an IP20 protection rating, so installation inside a closed panel is required. Heat generated by the switching devices is removed through a liquid cooling circuit that connects to the rear plate. This liquid path supports operation across an ambient range of 0 to 45 °C without automatic current reduction during prolonged duty cycles.
Command data reach the unit through a single-axis position control interface, and rotor information returns through digital servo feedback from the attached motor. This feedback arrangement lets the drive process position and velocity data directly from the motor during closed-loop operation. Reliable operation is permitted up to 1000 m above sea level, where cooling performance and dielectric strength remain within the stated operating range. During storage or shipment, the electronics tolerate temperatures from -30 to 85 °C without loss of calibration. These limits support standard industrial handling and indoor installation conditions.
Frequently Asked Questions about DDS02.1-F200-DL01-01-FW:
Q: What is the rated current for the DDS02.1-F200-DL01-01-FW drive controller?
A: The DDS02.1-F200-DL01-01-FW operates with a rated current of 200A.
Q: How is the DDS02.1-F200-DL01-01-FW drive controller cooled?
A: This model is cooled using a coolant-based cooling method.
Q: What type of communication interface is featured on the DDS02.1-F200-DL01-01-FW?
A: The drive controller includes a single-axis position control communication interface.
Q: What type of motor feedback does the DDS02.1-F200-DL01-01-FW support?
A: This unit uses digital servo feedback for motor feedback functionality.
Q: What is the operating temperature range of the DDS02.1-F200-DL01-01-FW drive controller?
A: The DDS02.1-F200-DL01-01-FW is built to operate within a temperature range of 0 to 45°C.
