Product Description:

The DDS02.1-F200-DA07-00 drive controller is produced by Bosch Rexroth Indramat and belongs to the DDS Drive Controllers series. It links a motion control system to field-mounted motors and converts command signals into regulated three-phase output for industrial axes in packaging, handling, and general automation equipment. Its digital control architecture supports stable torque, speed, and position response during coordinated machine movement. This allows the controller to react quickly to changing loads without separating control and power functions into multiple modules. Power electronics, signal conditioning, and fault monitoring are integrated in one unit, which helps keep cabinet layouts compact while supporting modular machine designs.

It delivers a continuous output of 200 A, allowing the drive to energize medium-to-large servo motors without external boosters. Control commands reach the unit through an analog interface, which converts ±10 V velocity or torque references into internal setpoints for the pulse-width-modulated inverter stage. Thermal management relies on liquid cooling through the rear heat sink so semiconductor temperatures stay within their normal operating range during long duty cycles. The electronics are housed in an enclosure rated IP20, so the controller must be installed inside a protective cabinet where direct water spray and accidental contact are limited. Reliable operation is permitted at ambient temperatures from 0 to 45 °C.

The drive is part of Line 02 and is Version 1. Installation is permitted at elevations up to 1000 m above sea level, and operation above that height requires derating because reduced air density lowers heat removal efficiency around the installation. Position and speed data from the motor are received as digital servo feedback, allowing the controller to close high-resolution control loops without external converters. During storage or shipping, the unit tolerates ambient temperatures from -30 to 85 °C.