Product Description:

The DDS02.1-F200-DA01-01-FW is a digital AC servo drive controller produced by Bosch Rexroth Indramat and assigned to the DDS Drive Controllers series. It regulates current for matched motors so automated axes can start, stop, and hold position with repeatable accuracy. The controller interprets reference commands from a machine control and generates a precisely timed output waveform that matches the mechanical demands of the process. In automated transfer systems, packaging equipment, and similar machinery, it serves as the power stage between the control system and the motor.

The drive communicates through an analog interface, so command values are transmitted as voltage or current signals rather than digital words. Because the command channel is analog, the control system can adjust references through standard electrical signal levels without a fieldbus link. Heat from the power stage is removed by liquid cooling, which supports continuous operation without depending on cabinet airflow. The output bridge is rated for a continuous phase current of 200 A, allowing the unit to supply large motors that require sustained torque. Rotor position is returned through digital servo feedback, providing the control loop with high-resolution signals for stable speed regulation, accurate positioning, and fast correction of load-related changes during operation.

The controller is part of Line 02, which places it within the second design line of this drive platform. The overall build state is Version 1, indicating the first hardware release for this configuration. These identifiers place the unit within the correct product generation for its associated control and power sections. Its control structure is fixed for this model, so operating behavior follows the assigned command arrangement used by the drive. This arrangement is commonly used in motion applications that need precise response from a centralized machine control system.