Product Description:

The DDS02.1-F150-DA01-00 is a drive controller built by Bosch Rexroth Indramat and placed within the DDS Drive Controllers series. As a servo drive controller, it delivers commanded current and voltage to synchronous and induction motors so that axis motion in automated cells, packaging lines, and material-handling gantries follows the trajectory produced by a master CNC or PLC. By converting low-level command signals into regulated three-phase power, the unit forms the interface between high-speed digital control systems and machine actuators in coordinated industrial motion systems.

The drive exchanges setpoint and feedback signals across an analog interface, enabling straightforward connection to legacy motion cards that output ±10 V velocity or torque commands. Internal power electronics use liquid cooling, which stabilizes semiconductor temperature during continuous high-load duty and supports installation in sealed cabinets without forced air. At full load, the current stage can supply 150 A, giving the connected motor ample peak torque for rapid indexing and sustained acceleration demands. Position verification arrives through digital servo feedback, so the controller can close a high-resolution loop even when the motion source is purely analog. Classified as a Digital AC Servo Drive Controller, the module combines DSP-based regulation with flexible field wiring for axis control in mixed-generation automation systems.

The controller carries Function ID 01, belongs to Line 02, and is delivered as Version 1. These identifiers correspond to fixed parameter ranges and supported power sections within the product line, keeping the control hardware aligned with its intended operating range. The preset gain structure matches the selected feedback type, supporting stable loop response with compatible motors during continuous-duty operation and repeated axis movement.