DDS02.1-F100-DA01-00
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911261277
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 3-5 Days
The DDS02.1-F100-DA01-00 Servo Drive is manufactured by Bosch Rexorth Indramat. The drive operates with Coolant Technology, 100 A rated current, and Digital Servo Feedback.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The DDS02.1-F100-DA01-00 is characterized as a rapid-response DDS drive controller, especially when combined with LAR, MDD, and MKD AC motors. This unit was designed and manufactured by Rexroth Indramat. Drive controllers have a modular design, and a basic unit can serve a variety of purposes, depending on the utilized modules. The DDS02.1-F100-DA01-00 is supplied pre-configured, and it comes with plugin modules, firmware, and software modules. There are five module slots on this unit, U1 - U5. Its command communication module fits into slot U1, auxiliary plugin module in U2, and software module in U5. Other relevant modules can be fitted in slots U3 and U4.
The DDS02.1-F100-DA01-00 leverages a coolant for temperature control, and its rated current is 100 A. In other to interact effectively with drive systems, this device is equipped with a Digital Servo Feedback and an ANALOG communication module. The DC bus voltage of DDS drive controllers is 300 V (+/- 15 %). Its maximum peak current and maximum continuous current are rated 100 A. Its protection degree is IP 20.
A basic DDS02.1 unit consumes 150 mA at +/-15 V and 500 mA at +24 V. Also, the designated motor feedback of this model has a current consumption of 40 mA at +24 V. For a safe and optimal operation of the DDS02.1-F100-DA01-00, the proper storage, transport, installation, and commissioning prerequisites must be followed. In addition, Rexroth Indramat only permits trained technicians to work on DDS units. The DDS02.1-F100-DA01-00 is industry-grade equipment and is meant to be installed in commercial machines. With rated data, the max installation height of the drive controller is 1000 meters above sea level.
