Product Description:

The DDS02.1-A200-DL01-01-FW is a digital AC servo drive controller produced by Bosch Rexroth Indramat as part of the DDS Drive Controllers series. It is designed to regulate three-phase servo motors in automated machinery, coordinating speed, torque, and position while interfacing with higher-level PLCs. By converting incoming bus power into controlled output waveforms, the unit executes precise motion profiles required for pick-and-place axes, packaging stations, and material-handling gantries. The controller supports closed-loop motion in machines that need repeatable acceleration, stable speed regulation, and accurate stopping during continuous production. It can be integrated into automated lines where one controller must keep a servo axis synchronized with upstream logic and downstream machine timing.

Its rated output reaches 200 A, allowing the drive to energize sizable synchronous motors without derating. Command exchange is carried over a single-axis position control interface, so position commands and status words pass directly between the controller and the master. Feedback from the motor arrives as digital servo feedback, enabling high-resolution speed loops without analog drift and supporting accurate response to changing load conditions. Thermal management relies on external air cooling, and the blower draws fresh air from outside the enclosure rather than recirculating warmed cabinet air. The unit is part of Line 02, which places it with drives that follow the same design line and matching option structure.

The controller uses Function ID 01 and Function ID Version 01 for its assigned control set. The unit is Version 1, indicating the product revision used for this model. These identifiers distinguish the controller within the product range and match it with the intended control configuration. They also keep documentation and parameter sets aligned for units with the same coded functions. The version designation refers to the controller revision used for this drive format.