Product Description:

The DDS02.1-A200-DA02-01-FW is a digital AC servo drive controller produced by Bosch Rexroth Indramat within the DDS Drive Controllers series. In an automation cell, the unit supplies regulated power and closed-loop control to matched servo motors, translating low-level PLC commands into precise torque and speed changes. When paired with panel-mounted supply modules, it coordinates axis motion for assembly stations, material-handling gantries, and packaging machines that require repeatable positioning. Closed-loop regulation lets the controller correct motor response during acceleration, deceleration, and changing process loads. That makes the unit suitable for coordinated axes that must start, stop, and settle accurately during repeated cycles.

Electrical connectivity is organized around an analog interface, so the drive accepts ±10 V velocity or torque commands without additional fieldbus hardware. Feedback from the motor reaches the control electronics through digital servo feedback, allowing high-resolution position monitoring and rapid error detection. The power stage is rated for a continuous output of 200 A, which suits mid-frame and large-frame MDD or MKD servo motors under dynamic load. Internal heat is removed by external air from outside the control cabinet, a cooling method that requires a clean airflow path while helping keep enclosure temperatures stable. This arrangement suits analog drive systems that rely on central command generation rather than onboard network communication. Its firmware is ordered separately.

Configuration data identify the controller as Function ID version 01. It belongs to hardware line 02, and the build revision is marked as version 1. These identifiers distinguish the unit from other DDS variants with different control sections or current classes. They also indicate the release grouping used for this controller.