Product Description:

The DDS02.1-A150-DL01-00 is a digital AC servo drive controller built by Bosch Rexroth Indramat for the DDS Drive Controllers series. Installed between the mains supply and a servo motor, it converts three-phase power into regulated pulses that control torque and speed for coordinated motion in material-handling stations, printing presses, and other automated cells. The module combines command processing, drive amplification, and protective monitoring in one housing. This arrangement reduces cabinet space while maintaining deterministic operation on a single axis. It is suited to machines that require repeatable starts, stops, and speed changes during normal production cycles.

At the power stage, the controller can continuously deliver 150 A, so motors with large electromagnetic loads can accelerate without current foldback. Thermal energy is exhausted through external air cooling, and ambient air moves across the heat sink to keep semiconductor junctions within tolerance. Rotor position arrives through digital servo feedback, allowing the internal regulator to close the speed loop quickly and respond to load changes without external analog conditioning. The housing has an IP20 enclosure rating, so the unit must be installed inside a machine panel. Electronics remain stable at ambient temperatures from 0 to 45 °C. The unit is version 1, and its connector layout matches the designated supply modules used with this drive type.

The drive can be installed at elevations up to 1000 m without power reduction, which supports use on upper production floors and other elevated indoor installations. When de-energized, it withstands storage temperatures from -30 to 85 °C, allowing the unit to remain protected during transport and warehouse storage. Command data enter through the bus used for single-axis position control, which suits applications where each axis is addressed independently. The drive belongs to Line 02, and Function ID 01 identifies its control assignment. This coding keeps the operating structure matched to the intended control configuration.