Product Description:

The DDS02.1-A100-DS37-00 is a servo drive controller built by Bosch Rexroth Indramat for the DDS Drive Controllers series. It sits between the machine-level PLC and the connected AC servo motor, shaping voltage and current so commanded motion profiles are followed accurately. This arrangement lets the controller convert high-level motion commands into regulated electrical output during acceleration, constant-speed travel, and stopping. In automated cells, the unit regulates speed, torque, and position for coordinated multi-axis movement in pick-and-place stations, printing drums, and material-handling gantries. Its cabinet-mounted design is intended for use with compatible power supplies and motors from the same platform.

The controller’s continuous output stage is rated at 100 A, allowing it to drive medium-power synchronous or induction servomotors across most duty cycles. Command and diagnostic data pass through a SERCOS interface, which provides deterministic fiber-optic communication with the central motion processor. Thermal management uses external air cooling, so ambient air is drawn through the housing from outside the control cabinet rather than recirculating warmer internal air. Rotor position is monitored by digital servo feedback, which allows the drive to close control loops at high resolution and respond quickly to changing loads. The unit is a Digital AC Servo Drive Controller, so its settings are handled electronically rather than with analog potentiometers.

The unit is part of Line 02 and carries Version 1. These identifiers place it within a specific hardware generation of the platform and clarify which mechanical interfaces belong with this build. They also indicate compatibility with matching baseplates, backplanes, and supply modules intended for the same generation.