Product Description:

The DDS02.1-A100-DS06-00/S002 is a digital AC servo drive controller produced by Bosch Rexroth Indramat within the DDS Drive Controllers series. This unit forms the power and control link between a synchronous or induction motor and an automation host. By modulating current and monitoring position, it delivers commanded torque and velocity in machinery such as packaging stations, gantries, and material-handling axes. Its closed-loop control behavior helps the connected motor respond accurately during speed changes, positioning moves, and repeated production cycles. It is used where the drive must translate command values from the control system into stable motor behavior across acceleration, constant-speed running, and deceleration.

I/O with the primary controller is handled over the SERCOS interface, allowing deterministic fiber-optic communication for cyclic setpoints and diagnostic data. The power module can supply up to 100 A of continuous output, so the drive can support mid-range and high-inertia motors in demanding motion tasks. Heat is removed by air from outside the control cabinet, so the cooling path does not rely on recirculating warm cabinet air. The electronics are protected to IP20, which limits finger contact and suits installation inside closed electrical enclosures. Rotor position and velocity are returned through digital servo feedback, enabling high-resolution control loops and quick response to load disturbances during indexing or coordinated motion. This feedback arrangement lets the controller correct deviations quickly when axis load or commanded speed changes.

The drive remains operational from 0 to 45 °C, which fits typical industrial ambient conditions. Non-operational storage is permitted from -30 to 85 °C, helping protect the unit during transport and long-term storage. An altitude limit of 1000 m above sea level allows full output in most standard installations without additional cooling measures. Within the product hierarchy, it belongs to Line 02 and is version 1. This line designation separates it from other DDS controller variants with different configurations.