Product Description:

The DDS02.1-A100-DL03-01-FW is a digital AC servo drive controller produced by Bosch Rexroth Indramat and supplied within the DDS Drive Controllers series. It commands and protects synchronous or induction servo axes in industrial automation. Positioned between a higher-level motion controller and the connected motor, the unit converts command data into regulated three-phase output while monitoring load, temperature, and feedback signals. In factory lines, it provides closed-loop torque and velocity control for packaging, printing, and material-handling stations that require repeatable motion profiles during continuous operation.

The drive is designed for a rated current of 100 A, allowing it to energize medium-to-large motors during continuous duty. An IP20 enclosure is intended for indoor cabinets where finger protection is required, but full dust sealing is not necessary. Thermal management relies on air from outside the control cabinet, so fresh airflow passes across the heat sink without the need for a liquid cooling circuit. Command data arrive through a single-axis position control interface, which suits applications where one mechanical axis is driven by the controller. Rotor position is returned through digital servo feedback, allowing high-resolution closed-loop regulation during each control cycle and stable response to changing load conditions.

Environmental limits support use in standard workshops, with a 0 to 45 °C operating range for normal powered operation. Performance remains stable up to a 1000 m maximum elevation before derating is required. When powered down, the unit can tolerate a -30 to 85 °C storage range, which supports shipment and warehouse storage without active climate control. The product belongs to Line 02 and Version 1, and it carries Function ID 01 for parameter compatibility within the series.