Product Description:

The DDS02.1-A100-DG01-00 is a digital AC servo drive controller from Bosch Rexroth Indramat in the DDS Drive Controllers series. It regulates motor power, processes feedback signals, and interfaces with PLC command modules in automated machinery. By using pulse-width modulation, it controls torque and speed so each axis can follow precise motion profiles in packaging, printing, and material-handling systems. It serves as the power stage between the command system and the motor, converting control demands into regulated electrical output. In typical systems, it works with a compatible servo motor to translate command signals into controlled axis movement.

The drive has a continuous output capacity of 100 A, allowing it to power medium-to-large synchronous motors without current derating. Thermal control relies on external air cooling, so cabinet fans move plant air across the heat sink to limit internal temperature rise. The enclosure has an IP20 rating, which provides finger-safe protection and requires installation inside a cabinet. Because the housing is not sealed against dust or water, it is intended for protected indoor mounting rather than open exposure on the machine frame. Position and velocity loops close through digital servo feedback, allowing the controller to correct motor current in real time as load conditions change. Electrical components operate reliably in ambient temperatures from 0 to 45 °C, which supports installation beside other heat-generating modules on the same backplane.

The controller maintains full performance at elevations up to 1000 m above sea level. When powered down, it can be stored from -30 to +85 °C without damage. The storage range supports transport and warehouse storage before installation. The unit carries Function ID 01, belongs to Line 02, and is supplied in Version 1. These identifiers match the parameter structure and diagnostic behavior used for this drive type.