Product Description

Bosch Rexroth is especially dedicated to customer satisfaction, manufactures high-quality products including drive controllers, servo motors, spindle motors, inverters, braking resistors, and frequency converters.

The DDS02.1-W100-DS50-00-FW model is compatible with company supply units that have a stabilized voltage of DC 24 V. On the drive controller, the SERCOS interface plugin module provides inputs for assessing reference switches, sensor inputs, and travel range limit switches. This drive controller's preservation setting must also be clean, vibration-free, and dirt-free. If necessary, shock-absorbing supports might be used during transit. The cables used in the DDS02.1 drive controller or for its components can reach a maximum length of 75 meters and must be manufactured by Rexroth Indramat. The user guidelines' safety measures must be followed in all instances. Inappropriate use of this equipment, as well as failure to heed the warnings, can result in physical damage, personal injury, or, in severe situations, death. The company is not accountable for any losses incurred as a result of failing to heed the cautions contained in the operating instructions. The DDS02.1 drive controller uses 100 A of rated current and should be installed in a control cabinet with an approved protection grade and exterior ventilation. The SERCOS interface communication card is fitted into the U1 slot of the drive controller while the firmware module is plugged into the U5 slot.

The model DDS02.1-W100-DS50-00-FW with loss in rated data has a maximum operating temperature of +55 degree Celsius. The module is not completely liquid-proof due to its IP20 protection rating, although there is some safety against fluids. The (DDS02.1-W100-DL20-00) model weighs approximately 7.5 kilograms and has a continuous current of 40 A.