Product Description

The DDS02.1-W050-DL09-01-FW drive controller supports a maximum installation altitude of 1,000m over sea level. This Bosch Rexroth product comprises a one-axis positioning module that supports programming of up to 3,000 program blocks. Each of these blocks helps in describing the outputs to be set or a certain set of inputs to be monitored. The device should not be connected with an unregulated power supply. The unit must be worked on only by qualified personnel. It is designed to support installation only in machinery meant for commercial use. The product should always be checked for permanent connection of the earth wire after the installation process.

The controller tends to perform with derated data if its ambient conditions are exceeded. The product is intended to operate between 0°C and 45°C. This device is meant to be worked on only after five minutes of turning OFF the power so that its capacitors get discharged fully. The unit must encompass protection against indirect contact in accordance with DIN EN 50178 specifications. Its earth wire should be connected even before testing. The drive controller has chances of depicting dangerous movements due to faulty wiring or cable at any point of time during operation. The product is available with a warranty for one year.

The power connection of the drive must be isolated using a starting lockout or an emergency stop circuit to avoid unplanned start-up. The controller is supposed to be handled using protective clothing if needed. The drive and firmware parameters are stored in the software module. Its firmware is updated on an ongoing basis to function accurately without changing the functions. The energy loss of the product depends on the continuous current of its connected motor in standstill mode. The device is shipped in custom military-grade packaging to any location through a dedicated team of freight carriers with a worldwide network.