Product Description

The DDS02.1-W050-DL08-00 drive controller from Bosch Rexroth belongs to the DIAX02 product group of such controllers. The DDS series controller has a modular design. The product can be used in conjunction with an MDD, LAR or MKD series AC motor. This combination allows the drive to operate as a rapid response drive. The device is cooled by deploying heat technology. The unit is meant to be installed inside a control cabinet. It may be needed to use a large cabinet along with sir conditioning. The product is ideal for use in machine tools and robotics. The device is connected to the motor through a motor power cable and a feedback cable.

The controller has a rated current of 50A. The unit has a series code of 2. It utilizes a single-axis positioning control communications module. The product comes with a function ID code of 08. The device is always supposed to be stored in a shock-free environment. The unit transportation has to be done using shock damping supports if needed. It must be connected only with a 24VDC regulated power supply. This product can cause bodily injury or property damage if it is used inappropriately. The device should feature disconnection from the voltage source or the mains before working on its live parts. This DDS02.1-W050-DL08-00 controller is available with a one-year warranty tag.

The product has a discharge current of more than 3.5mA. The device must always be connected with the earth wire before starting up even if it is just for testing. The housing tends to have a high voltage if there is no earth connection. The controller tends to move dangerously if its components are used incorrectly. This product must be in standstill mode before entering the danger zone. The drive controller can be shipped to any address of your choice irrespective of the country you live in.