CSH01.3C-SE-ENS-NNN-CCD-NN-S-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911330667
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
2 Seconds
The Bosch Rexroth Indramat CSH01.3C-SE-ENS-NNN-CCD-NN-S-NN-FW belongs to the CSH Advanced Controllers series and offers 2 analog outputs with a nominal output of 5 V and 1 mA. It is equipped with 11 digital inputs, 4 configurable outputs, and supports SERCOS II control communication as well as SERCOS III Master cross communication.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The CSH01.3C-SE-ENS-NNN-CCD-NN-S-NN-FW is a modular motion-logic controller manufactured by Bosch Rexroth Indramat within the CSH Advanced Controllers series. Designed for cabinet installation, the board supervises drive axes, manages discrete I/O, and links machinery to higher-level systems through real-time networks. In automated assembly cells or packaging machines, it provides position loops, sequence control, and diagnostic feedback so the host PLC can be simplified or eliminated.
Two isolated analog channels provide a nominal signal level of 5 V, 1 mA. With a resolution of 19.5 mV/inc, the card can drive proportional valves or reference inputs with fine granularity. The controller provides 2 analog outputs, along with four configurable digital outputs that can pulse up to 100 ms for valve or relay actuation. It also has 11 opto-coupled digital inputs, allowing sensors, limit switches, or encoder index tracks to send status signals directly to the control logic. While performing these I/O tasks, the controller draws only 8.5 W from the supply, which helps keep cabinet thermal load low. Its dry contacts can switch DC 24 V at 1 A, allowing direct control of interposing relays or small solenoids.
The standard encoder evaluation interface can power feedback devices with 300 mA from an isolated source of DC 11.6 V, so most SinCos or TTL encoders can operate without an external supply. At startup, the module's inrush current peaks at 4 A, after which each switched output may deliver up to 500 mA for lamp loads or brake relays. Deterministic motion data reach the board over SERCOS II, while a built-in SERCOS III master supports cross-communication to adjacent drives. For diagnostics or setup, a point-to-point RS-232 port can be cabled up to 15 m, and application logic can reroute status through four user-assignable outputs when fieldbus traffic is unavailable.
Frequently Asked Questions about CSH01.3C-SE-ENS-NNN-CCD-NN-S-NN-FW:
Q: How many analog outputs does the CSH01.3C-SE-ENS-NNN-CCD-NN-S-NN-FW controller include and what are their specifications?
A: The CSH01.3C-SE-ENS-NNN-CCD-NN-S-NN-FW features two analog outputs with a nominal output of 5 V at 1 mA.
Q: What communication interfaces are available on the CSH01.3C-SE-ENS-NNN-CCD-NN-S-NN-FW controller?
A: This controller utilizes SERCOS II for control communication and supports SERCOS III Master for cross communication.
Q: How many digital inputs are available on the CSH01.3C-SE-ENS-NNN-CCD-NN-S-NN-FW model?
A: The CSH01.3C-SE-ENS-NNN-CCD-NN-S-NN-FW is equipped with 11 digital inputs for various signal integration needs.
Q: What are the encoder supply voltage and current details for the CSH01.3C-SE-ENS-NNN-CCD-NN-S-NN-FW?
A: This controller provides an encoder supply voltage of DC 11.6 V and a maximum supply current of 300 mA.
Q: What is the relay contact rating for the CSH01.3C-SE-ENS-NNN-CCD-NN-S-NN-FW controller?
A: The relay contacts on this model are rated for DC 24 V at 1 A.
