CSH01.3C-S3-EN1-EN1-CCD-NN-S-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911335994
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
45 Seconds
The Bosch Rexroth Indramat CSH01.3C-S3-EN1-EN1-CCD-NN-S-NN-FW is part of the CSH Advanced Controllers series and features SERCOS III control communication with an RJ-45, 8-pin port. It provides dual resolver/HSF encoder interfaces, 5 V analog output voltage, and supports 8.5 W base and 22.5 W configured 24 V power. This controller functions as a master in cross communication and includes a 100Base-TX engineering interface.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The CSH01.3C-S3-EN1-EN1-CCD-NN-S-NN-FW control section is manufactured by Bosch Rexroth Indramat and belongs to the CSH Advanced Controllers series. Installed inside a multi-axis drive rack, it supplies the command layer that links motion tasks with higher-level automation. The module supervises axis coordination, accepts probe signals, and forwards deterministic data to the connected drives so factory equipment follows the intended sequence and speed profile. This role allows the control section to separate motion management from the power stage while keeping response timing consistent across connected axes.
Field communication is based on SERCOS III, giving the card deterministic cycle times for motion loops, and both network connectors use the compact RJ-45, 8-pin format for straightforward cabinet wiring. For service access, a separate Ethernet jack supports 100Base-TX so the unit can be reached through a standard network connection without interrupting the real-time bus. Position feedback arrives through the dual-channel Dual Resolver/HSF encoder interface, allowing mixed resolver and high-speed feedback on a single axis pair. Two selectable probe inputs capture edge-triggered events such as registration marks. Digital outputs can supply 500 mA per channel with a total group limit of 1000 mA, and the relay contact can switch up to 30 VDC at 1 A for interlock functions. This arrangement keeps communication, feedback handling, and discrete signal exchange within the same control section.
The analog monitor pin delivers a calibration reference of 5 V for signal verification. Internal logic is supplied from the shared 24 V bus; in standby it draws 8.5 W, while a fully configured set of option cards increases consumption to 22.5 W. When the rack is first energized, the section momentarily demands 4 A, and that inrush lasts no longer than 100 ms. These values describe the control section's steady-state and startup demand on the shared supply. They also show that the module places only a brief peak load on the power source before settling to normal operating consumption.
Frequently Asked Questions about CSH01.3C-S3-EN1-EN1-CCD-NN-S-NN-FW:
Q: What control communication protocol is used on the CSH01.3C-S3-EN1-EN1-CCD-NN-S-NN-FW controller?
A: This controller uses SERCOS III for control communication, supporting high-speed deterministic data transfer.
Q: What is the analog output voltage for the CSH01.3C-S3-EN1-EN1-CCD-NN-S-NN-FW?
A: The analog output voltage available on this model is 5 V.
Q: How many probe inputs does the CSH01.3C-S3-EN1-EN1-CCD-NN-S-NN-FW provide?
A: It offers two probe inputs for connecting external sensors or switches.
Q: What is the relay contact rating on the CSH01.3C-S3-EN1-EN1-CCD-NN-S-NN-FW?
A: The relay contact rating for this controller is 30 VDC at 1 A maximum load.
Q: What encoder interfaces are supported by the CSH01.3C-S3-EN1-EN1-CCD-NN-S-NN-FW?
A: This controller features dual resolver/HSF encoder interfaces for connecting position feedback devices.
