CSH01.3C-PB-EN1-NNN-CCD-S2-S-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911329693
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat CSH01.3C-PB-EN1-NNN-CCD-S2-S-NN-FW is part of the CSH Advanced Controllers series and supports PROFIBUS-DP communication protocol with a maximum baud rate of 12 MBaud. This controller features a single-line display control panel, safe motion safety function, and encoder interfaces for resolver and HSF. It has an analog input resistance of 160 kilohms and a base power consumption of 8.5 watts.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The CSH01.3C-PB-EN1-NNN-CCD-S2-S-NN-FW is a modular control section produced by Bosch Rexroth Indramat within the CSH Advanced Controllers series. It forms the command layer in drive assemblies, generating motion profiles, evaluating encoder feedback, and relaying setpoints to power sections. By combining fieldbus links and analog channels, the unit coordinates multi-axis servo systems used in material handling, packaging, and machine tools. Its compact card format enables direct insertion into IndraDrive hardware without separate wiring backplanes.
Field-level communication is handled through a PROFIBUS-DP interface that operates at 12 MBaud. Deterministic telegram exchange on PROFIBUS-DP allows synchronous position updates between the controller and subordinate drives. For plant-wide diagnostics, the unit also recognizes broadcasts that conform to IEEE 802.3, letting an external gateway forward status frames to Ethernet supervisory systems. Two differential analog inputs with an impedance of 160 kΩ capture process variables such as tension or pressure, while the corresponding ±10 V output stage resolves commands at 19.5 mV/inc for smooth actuator control. The single-line display control panel supports basic parameter entry, and telegrams with a maximum pulse width of 100 ms can be processed without overruns. EnDat channel EN1 is powered from an 8 V supply, provides 18.2 Vpp excitation to the resolver, and samples carrier signals at 4 kHz.
Base consumption of 8.5 W keeps internal heat generation low, yet the rack must accommodate an inrush of 4 A when power is applied. The encoder interface supports Resolver and HSF, letting the same card read resolver signals or high-speed feedback tracks without add-on modules. Safe torque off and speed monitoring are integrated under the Safe Motion function and are wired through a dedicated D-Sub 9-pin female safety connector for emergency stop circuits.
Frequently Asked Questions about CSH01.3C-PB-EN1-NNN-CCD-S2-S-NN-FW:
Q: What communication protocol and baud rate are supported by the CSH01.3C-PB-EN1-NNN-CCD-S2-S-NN-FW controller?
A: The CSH01.3C-PB-EN1-NNN-CCD-S2-S-NN-FW controller supports PROFIBUS-DP communication protocol at up to 12 MBaud baud rate.
Q: What is the analog input resistance on the CSH01.3C-PB-EN1-NNN-CCD-S2-S-NN-FW?
A: The analog input resistance of this controller is rated at 160 kΩ.
Q: What type of control panel does the CSH01.3C-PB-EN1-NNN-CCD-S2-S-NN-FW feature?
A: This model offers a single-line display control panel for managing functions and settings.
Q: Which encoder interfaces are available on the CSH01.3C-PB-EN1-NNN-CCD-S2-S-NN-FW controller?
A: The CSH01.3C-PB-EN1-NNN-CCD-S2-S-NN-FW supports both resolver and HSF encoder interfaces.
Q: What is the base power consumption of the CSH01.3C-PB-EN1-NNN-CCD-S2-S-NN-FW controller?
A: This controller has a base power requirement of 8.5 W during operation.
