CSH01.3C-NN-ENS-MA1-CCD-NN-S-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911330900
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
19 Seconds
The Bosch Rexroth Indramat CSH01.3C-NN-ENS-MA1-CCD-NN-S-NN-FW advanced controller is part of the CSH Advanced Controllers series. It features a 100Base-TX engineering interface with an RJ-45 8-pin connector and a D-Sub 15 female ENS connector. This controller supports 2 differential input channels and 2 analog output channels, each with 12-bit resolution.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The CSH01.3C-NN-ENS-MA1-CCD-NN-S-NN-FW controller is produced by Bosch Rexroth Indramat and belongs to the CSH Advanced Controllers series. It occupies the command level of an IndraDrive system, interpreting fieldbus traffic and converting it into axis-specific control signals for industrial automation tasks such as packaging or conveying. Option slots one through three are pre-populated with the ENS, MA1, and CCD modules, so motion, analog processing, and Ethernet service functions are available without additional hardware inside standard control cabinets.
Configuration and diagnostics are handled over the engineering interface, which is accessible through an RJ-45, 8-pin jack that carries 100Base-TX signaling. Compliance with the IEEE 802.3 standard ensures that the controller can be connected directly to standard industrial Ethernet switches. For legacy serial tools, an RS-232 port is available with a maximum cable length of 15 m. The ENS module supplies safe position data through a dedicated D-Sub 15 Female connector, and it draws a stabilized 12 V feed from the base unit. A single-line panel display on the front allows status words to be viewed without an external PC.
The MA1 module equips the controller with 2 differential channels that accept ±10 V process feedback at a conversion depth of 12 bit. Outbound commands are delivered to two analog outputs that can drive a load of 1 kΩ per channel and change in programmable steps of 5 mV/inc, allowing fine setpoint adjustment for drives, valves, or inverter reference inputs. Matching 12-bit resolution is maintained on the outputs for symmetrical performance. CCD networking capability remains active in parallel, so deterministic motion control messages and analog transducer data can share the same hardware platform without timing conflicts.
Frequently Asked Questions about CSH01.3C-NN-ENS-MA1-CCD-NN-S-NN-FW:
Q: What type of engineering connector is featured on the CSH01.3C-NN-ENS-MA1-CCD-NN-S-NN-FW controller?
A: The CSH01.3C-NN-ENS-MA1-CCD-NN-S-NN-FW controller uses an RJ-45, 8-pin connector for engineering access.
Q: How many MA1 input channels does the CSH01.3C-NN-ENS-MA1-CCD-NN-S-NN-FW provide?
A: This controller is equipped with two differential MA1 input channels, allowing for reliable analog input operations.
Q: What is the supported load for the MA1 output channels on this controller?
A: The MA1 output channels of this controller support a load of 1 kΩ, fitting standard analog signal requirements.
Q: Which communication standard does the CCD module in CSH01.3C-NN-ENS-MA1-CCD-NN-S-NN-FW follow?
A: The CCD standard supported by this model is IEEE 802.3, which ensures compatibility with Ethernet protocols.
Q: What is the output resolution and step size for the MA1 module in this controller?
A: For analog output, the MA1 module offers a resolution of 12 bits and a step of 5 mV per increment.
