CSH01.3C-ET-ENS-MA1-CCD-NN-S-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911332418
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat CSH01.3C-ET-ENS-MA1-CCD-NN-S-NN-FW is part of the CSH Advanced Controllers series and features Multi-Ethernet communication and SERCOS III cross communication. It offers two analog outputs with ±10 V range, 12-bit resolution, and a maximum current of 10 mA. The controller supports digital output current of 500 mA and relay contact rated at DC 24 V, 1 A.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The CSH01.3C-ET-ENS-MA1-CCD-NN-S-NN-FW is a single-axis control section from the CSH Advanced Controllers series produced by Bosch Rexroth Indramat. Installed in IndraDrive modular drives, this controller executes motion commands, processes feedback, and issues drive signals that coordinate servo axes in automated machinery. By providing deterministic control logic and fieldbus connectivity, it serves as the interface between higher-level PLCs and the power section, allowing precise positioning, velocity regulation, and synchronization of tooling, packaging, or material-handling equipment on the factory floor.
The analog front end offers 2 voltage-driven output channels. Each channel operates at a resolution of 12 bit and reproduces signals over a span of ±10 V. With a sourcing capacity of 10 mA, these outputs can support standard analog command interfaces without external buffers. Digital logic lines are rated for inductive loads, and each sink can deliver up to 500 mA. Complementary analog capture is available through two input converters, while the relay block switches auxiliary circuits rated for 24 V DC at 1 A.
Network traffic is handled through the embedded Multi-Ethernet interface that supports PROFINET, EtherNet/IP, and EtherCAT profiles, while drive-to-drive data exchange is carried by SERCOS III in cyclic real time. The encoder module accepts incremental or absolute sensors, allowing flexible feedback integration for different axis configurations. Signal integrity is supported by an input resistance of 120 Ω and a sensor supply of 11.6 V at up to 500 mA, which helps maintain a stable reference voltage even for long cable runs. Relay isolation of diagnostic contacts allows the controller to forward status information to external monitoring circuits without adding noise to the measurement channels.
Frequently Asked Questions about CSH01.3C-ET-ENS-MA1-CCD-NN-S-NN-FW:
Q: How many analog output channels are available on the CSH01.3C-ET-ENS-MA1-CCD-NN-S-NN-FW controller?
A: The CSH01.3C-ET-ENS-MA1-CCD-NN-S-NN-FW controller offers 2 analog output channels.
Q: What is the analog input resolution of the CSH01.3C-ET-ENS-MA1-CCD-NN-S-NN-FW controller?
A: This controller features a 12-bit resolution for its analog inputs, enabling accurate signal processing.
Q: What type of communication interface does the CSH01.3C-ET-ENS-MA1-CCD-NN-S-NN-FW controller use?
A: The CSH01.3C-ET-ENS-MA1-CCD-NN-S-NN-FW supports a multi-Ethernet communication interface for connectivity.
Q: What is the analog output voltage range of the CSH01.3C-ET-ENS-MA1-CCD-NN-S-NN-FW controller?
A: The analog outputs on this model operate within a range of ±10 V.
Q: Which protocol does the CSH01.3C-ET-ENS-MA1-CCD-NN-S-NN-FW use for cross communication?
A: Cross communication for this controller utilizes SERCOS III protocol.
