CSH01.3C-ET-ENS-EN2-CCD-S2-S-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911331932
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
58 Seconds
The Bosch Rexroth Indramat CSH01.3C-ET-ENS-EN2-CCD-S2-S-NN-FW is part of the CSH Advanced Controllers series and operates with a base power of 8.5 watts and a 24 V DC control supply. It features RJ-45 Ethernet ports supporting the 100Base-TX standard, and includes D-Sub connectors for encoders and safety, with the Safe Motion safety option.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The CSH01.3C-ET-ENS-EN2-CCD-S2-S-NN-FW is an advanced motion and machine controller produced by Bosch Rexroth Indramat within the CSH Advanced Controllers series. It coordinates servo axes, I/O modules, and network traffic in industrial automation cells by executing real-time control algorithms and distributing setpoints to connected drive inverters. Mounted inside a cabinet, the board supports Ethernet-based communication so that higher-level PLCs can exchange status, diagnostics, and parameter data without proprietary gateways, which helps it fit into standard automation networks.
During operation, the controller draws a control supply of DC 24 V, and its internal electronics consume only 8.5 W of base power, minimizing heat inside the cabinet. For fieldbus communication, it offers an Ethernet link that follows the 100Base-TX standard and is presented on an RJ-45 8-pin port; the link electronics add 2.2 W to the overall power budget. A startup inrush of 4 A is limited to a 100 ms pulse width so that upstream circuit breakers are not tripped. The device acts as the master node on the cross-communication bus, forwarding synchronized data frames to subordinate modules while maintaining deterministic timing for coordinated control tasks.
The cross-communication interface follows IEEE 802.3 rules, ensuring interoperability with standard industrial switches and common Ethernet infrastructure. Encoder feedback is accepted on two separate channels; the first channel uses a 15-pin female D-Sub connector and supplies 12 V to incremental or absolute encoders, while the second channel is routed through a 15-pin D-Sub plug that can source 350 mA at 5.0 V for high-resolution devices. A D-Sub 9-pin female port carries the integrated safety signals, and the selectable safety profile is Safe Motion, allowing drive-based monitoring of speed, position, and standstill without external relays. This arrangement supports precise feedback processing while keeping the safety interface integrated on the controller board.
Frequently Asked Questions about CSH01.3C-ET-ENS-EN2-CCD-S2-S-NN-FW:
Q: What control supply voltage does the CSH01.3C-ET-ENS-EN2-CCD-S2-S-NN-FW require?
A: The CSH01.3C-ET-ENS-EN2-CCD-S2-S-NN-FW controller operates on a DC 24 V control supply.
Q: What is the base power usage of the CSH01.3C-ET-ENS-EN2-CCD-S2-S-NN-FW?
A: The base power consumption for this model is 8.5 W.
Q: What safety feature is available on the CSH01.3C-ET-ENS-EN2-CCD-S2-S-NN-FW controller?
A: The safety option provided is Safe Motion, ensuring enhanced operational safety.
Q: What type of Ethernet port and standard does the CSH01.3C-ET-ENS-EN2-CCD-S2-S-NN-FW offer?
A: There is an RJ-45, 8-pin Ethernet port supporting 100Base-TX connectivity.
Q: What is the connector type for Encoder 1 on the CSH01.3C-ET-ENS-EN2-CCD-S2-S-NN-FW?
A: The Encoder 1 connector interface is a D-Sub 15 Female port.
