CSH01.3C-ET-ENS-EN1-CCD-S2-S-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911334953
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
48 Seconds
The Bosch Rexroth Indramat CSH01.3C-ET-ENS-EN1-CCD-S2-S-NN-FW is part of the CSH Advanced Controllers series and measures 241 mm high, 49.5 mm wide, and 103 mm deep. The controller features analog input resistance of 160 kΩ, 1 mA analog output current, and supports MultiEthernet and CCD cross communication. It offers encoder interfaces for IndraDyn, HIPERFACE, 1 Vpp, TTL, HSF, and RSF, along with a Safe Motion safety option rated at SIL2 / Cat. 3 PL d.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The CSH01.3C-ET-ENS-EN1-CCD-S2-S-NN-FW is a compact motion and logic module from Bosch Rexroth Indramat in the CSH Advanced Controllers series. In an automation line, this controller manages drive commands, processes field signals, and interfaces with safety circuits. This allows servo axes and I/O to operate in coordinated real time.
On the signal side, the controller accepts differential process variables through an analog input path that presents a high impedance of 160 kΩ; this large resistance prevents the board from loading sensors and helps maintain measurement accuracy. When it must deliver reference levels outward, its analog channel sources up to 1 mA, a current suited for drive enable or setpoint circuits. Discrete control is handled through inputs rated for 24 V / 3 mA, allowing direct connection to PLC output cards without additional relays, while its transistor outputs can switch loads up to 24 V / 0.5 A, which is enough for contactors or indicator lamps. Functional safety is embedded by the Safe Motion option qualified to SIL2 / Cat. 3 PL d, enabling certified stop and speed-monitoring modes without separate hardware.
For integration, the main fieldbus slot hosts MultiEthernet, so a single board can operate as an EtherNet/IP, PROFINET, or EtherCAT master, and device-to-device data can be exchanged over the dedicated CCD backplane channel. Engineering access is provided through an RJ-45, 8-pin connector that supports 100Base-TX mapping, while a separate RS232 port reaches 115 kBaud for legacy tools. Two encoder interfaces, with IndraDyn, HIPERFACE, 1 Vpp, and TTL on the first channel and HSF and RSF on the second, allow mixed feedback topologies on one axis. The housing measures 103 mm in depth, 241 mm in height, and 49.5 mm in width, so multiple controllers can be lined up side by side in a narrow cabinet without compromising airflow.
Frequently Asked Questions about CSH01.3C-ET-ENS-EN1-CCD-S2-S-NN-FW:
Q: What is the digital output load specification for the CSH01.3C-ET-ENS-EN1-CCD-S2-S-NN-FW controller?
A: The digital output load rating for the CSH01.3C-ET-ENS-EN1-CCD-S2-S-NN-FW is 24 V at 0.5 A.
Q: Which encoder interfaces are available on the CSH01.3C-ET-ENS-EN1-CCD-S2-S-NN-FW controller?
A: This controller is equipped with encoder interfaces including IndraDyn, HIPERFACE, 1 Vpp, TTL, HSF, and RSF, offering a range of feedback compatibility.
Q: What level of safety option is featured on the CSH01.3C-ET-ENS-EN1-CCD-S2-S-NN-FW?
A: Safe Motion functionality is supported at SIL2 / Category 3 Performance Level d on this controller.
Q: What type of cross communication does the CSH01.3C-ET-ENS-EN1-CCD-S2-S-NN-FW controller support?
A: Cross Communication on this model utilizes the CCD protocol for device networking.
Q: Which engineering port and link are available on the CSH01.3C-ET-ENS-EN1-CCD-S2-S-NN-FW controller?
A: The engineering interface uses a 100Base-TX RJ-45, 8-pin port for communication and setup.
