CSH01.2C-PL-ENS-ENS-CCD-L1-S-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911324258
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
21 Seconds
The Bosch Rexroth Indramat CSH01.2C-PL-ENS-ENS-CCD-L1-S-NN-FW is part of the CSH Advanced Controllers series. It features an 8.5 W base power consumption, a supply voltage of 24 V DC, and supports SERCOS III Master cross communication through ports X24 and X25. The controller is equipped with a standard control panel, offers encoder support for IndraDyn and Hiperface, and includes a starting lockout safety option.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The CSH01.2C-PL-ENS-ENS-CCD-L1-S-NN-FW controller is manufactured by Bosch Rexroth Indramat for the CSH Advanced Controllers series. This plug-in control section forms the command layer for IndraDrive power modules and coordinates motion, feedback, and safety functions within automated machinery. By processing fieldbus traffic and encoder data, the unit translates higher-level program instructions into precise drive tasks, making it a core component in packaging lines, material handling systems, and other industrial automation platforms that need synchronized multi-axis performance.
The controller operates from a dedicated DC 24 V logic supply and draws an inrush current of 4 A when energized. Under steady conditions, its base consumption is 8.5 W, while auxiliary features raise total demand to 25.5 W. A relay output rated at DC 24 V, 1 A allows direct actuation of low-power contactors, and a 100 ms maximum pulse width shapes one-shot control pulses. The standard control panel on the front face gives local parameter access and fault resets. Fiber cabling to distributed drives is routed through the X24 and X25 connectors that carry the network signals between controller sections.
System integration centers on communication and feedback. Cross-communication is handled by SERCOS III Master logic, which exchanges synchronous telegrams over the X24/X25 ports. For engineering tasks, the module exposes an Ethernet-based interface, allowing parameter download and service access without removing the card. Legacy diagnostics use the RS232 serial port, while real-time commands to higher-level equipment can pass through the parallel interface identified as X15. Encoders are powered from DC 11.6 V, 300 mA, supporting IndraDyn, Hiperface, and 1 Vpp standards for position feedback. A functional-safety layer incorporates Starting Lockout, preventing unintended drive enable until the monitored conditions confirm a safe startup state.
Frequently Asked Questions about CSH01.2C-PL-ENS-ENS-CCD-L1-S-NN-FW:
Q: Which encoder interfaces are compatible with the CSH01.2C-PL-ENS-ENS-CCD-L1-S-NN-FW controller?
A: The CSH01.2C-PL-ENS-ENS-CCD-L1-S-NN-FW controller supports encoder types including IndraDyn, Hiperface®, and 1 Vpp.
Q: What is the required supply voltage for the CSH01.2C-PL-ENS-ENS-CCD-L1-S-NN-FW?
A: This controller requires a supply voltage of DC 24 V.
Q: What is the maximum pulse width supported by the CSH01.2C-PL-ENS-ENS-CCD-L1-S-NN-FW?
A: The maximum pulse width handled by this unit is 100 ms.
Q: Which cross communication standard and ports does the CSH01.2C-PL-ENS-ENS-CCD-L1-S-NN-FW use?
A: It is equipped with a SERCOS III Master for cross communication, utilizing ports X24 and X25.
Q: What are the power consumption values for the CSH01.2C-PL-ENS-ENS-CCD-L1-S-NN-FW controller?
A: Base power consumption is rated at 8.5 W, while total power consumption reaches 25.5 W.
