CSH01.2C-PL-EN2-NNN-CCD-S1-S-NN-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911321268
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
52 Seconds
The Bosch Rexroth Indramat CSH01.2C-PL-EN2-NNN-CCD-S1-S-NN-FW is part of the CSH Advanced Controllers series and comes with a parallel I/O setup of 16 inputs and 16 outputs. This controller features one analog input, two analog outputs, and supports a parallel control interface. It includes SERCOS III cross communication, an RJ-45 100Base-TX engineering interface, and safety technology I/O with a D-Sub 9 female safety connector.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Bosch Rexroth Indramat manufactures the CSH01.2C-PL-EN2-NNN-CCD-S1-S-NN-FW control section, a member of the CSH Advanced Controllers series. The board fits into IndraDrive modular systems and acts as the central processor for motion axes, discrete signals, and network data. By combining drive regulation with programmable logic, it allows machine builders to synchronize servomotors, manage auxiliary devices, and exchange real-time status between higher-level PLCs and field components in industrial automation lines. Because the control section is integrated into the modular drive platform, axis control, logic execution, and communications remain closely linked during operation.
The controller handles mixed-signal I/O, including one analog input and two analog outputs for sensor feedback and actuator reference. It manages a parallel fieldbus with 16 Inputs, 16 Outputs through the Parallel Interface, enabling deterministic bit-level handshaking with external devices. Axis coordination is extended through a SERCOS III Master via X24/X25 link, permitting cyclic command exchange with subordinate drives. Parameter access from a laptop or HMI is available through an engineering port with a RJ-45, 8-pin, 100Base-TX connector, and cable runs can reach 100 m. Position feedback from linear or rotary encoders is accepted through a multi-protocol interface for EnDat 2.1 / 1 Vpp / 5 V TTL signals.
Power for the logic core is drawn from the EN2 rail at 350 mA, leaving capacity for auxiliary modules on the same backplane. For diagnostics and legacy automation links, the serial channel uses an RS232 Mini-DIN 8-pin plug and runs at 115 kBaud with a 15 m maximum cable length. Relay switching is provided by a single normally open contact. The integrated safety block uses Safety Technology I/O; its input side accepts 24 V / 3 mA, and its output can source 24 V / 0.5 A through the D-Sub 9 female connector to external emergency stop circuits.
Frequently Asked Questions about CSH01.2C-PL-EN2-NNN-CCD-S1-S-NN-FW:
Q: How many analog input channels are available on the CSH01.2C-PL-EN2-NNN-CCD-S1-S-NN-FW controller?
A: The CSH01.2C-PL-EN2-NNN-CCD-S1-S-NN-FW controller provides 1 analog input channel for signal acquisition.
Q: Which fieldbus protocol is used for cross communication in the CSH01.2C-PL-EN2-NNN-CCD-S1-S-NN-FW?
A: This model supports SERCOS III Master cross communication via its X24/X25 ports.
Q: What type of engineering interface is provided on the CSH01.2C-PL-EN2-NNN-CCD-S1-S-NN-FW?
A: The engineering interface for this controller is a standard RJ-45, 8-pin connector, supporting 100Base-TX Ethernet communication.
Q: How many parallel digital inputs and outputs does the CSH01.2C-PL-EN2-NNN-CCD-S1-S-NN-FW offer?
A: The device is built with 16 parallel digital inputs and 16 digital outputs to handle a variety of control signals.
Q: What safety connection and options are featured on the CSH01.2C-PL-EN2-NNN-CCD-S1-S-NN-FW controller?
A: This controller is equipped with a safety connector using a D-Sub 9 female port and supports Safety Technology I/O for functional safety integration.
